ZebraLight H32Fw CR123

Код: H32Fw-117g-1y//НК-1,СД-1,УК-2//* 
(0)
0 руб.
0 руб.
 

  • Снят с продажи! Архивная модель.

    • LED: Cree XM-L2 Neutral White (Nominal CCT 4400K)
    • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
    • Light Output (runtimes)
      • High:         H1 422 Lm (PID, approx 1.4 hr)   or    H2  230 Lm (1.6 hrs) / 95 Lm (4.1 hrs)
      • Medium:    M1 47 Lm (11 hrs)    or    M2   21 Lm (26 hrs) / 7.9 Lm (70 hrs)
      • Low:         L1   2.4 Lm (8 days)   or    L2   0.35 Lm (38 days) / 0.04 Lm (2.5 months) / 0.01 Lm (3 months)
      • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
         
      • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic CR123A batteries.
    • Operating Voltage Range: 2.7V - 4.2V
    • Battery: One CR123A or 3.6/3.7V 16340 li-ion rechargeable. Batteries are not included in the box.
    • Parasitic Drain: Negligible (much less than the self discharging of a battery)
    • Beam Type
      • Floody beam from frosted lens, with 90 degree beam spread
    • Dimensions
      • Head Diameter: 0.9 inch (22.8 mm)
      • Length:    2.7 inch (68.6 mm)
    • Weight
        • 1.16 oz (33 gram) 
       
    • 1.7 oz (48 gram) with CR123A
    • 2.6 oz (74 gram) with CR123A and headband
    • Features
      • PID thermal regulated output at the H1 level
      • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
      • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
      • Builtin over-discharging protection
      • Durable electronic soft-touch switch
      • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
      • Precision machined unibody casing from premium grade  aluminum bar stocks
      • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
      • Durable natural hard anodized finish (Type III Class I)
      • Sealed and potted LED driver circuitry
      • Battery reverse polarity protection
      • Tempered optical grade glass
      • Orange peel textured reflector
      • Waterproof to IPX7 (2 meters, 30 minutes)

    Operations

    This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

    • Basic Operation
      • One short-click turns on the light to High or turns off the light.
      • Two short-click turns on the light to Medium.
      • Three short-click turns on the light to the beacon-strobe mode.
      • Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.
    • Advanced Operation and Configuration
      • Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
      • Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.
      • The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.
      • This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.
      • Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.

        • Упаковка: коробка
          Комплектация: фонарь, налобное крепление,
          Гарантийный срок: 1 год

          • ZEBRA H32Fw CR123 N
Бонус за отзыв: 20 руб. однократно для каждого товара при условии, что Вы купили этот товар (необходимо зарегистрироваться или войти)

Отзывы про ZebraLight H32Fw CR123

© Copyright 2010-2024. ENECROSSE.ru - Все права защищены.